Exhibitors

Product Description : TARMOND MEA 301 is a soluble mineral oil with very good anti-corrosion properties where high mineral oil content is required. It is a cost-effective cutting oil with good finishing surfaces. The emulsion formed, provides superb lubricity and cooling to the tool and component for an excellent surface finish. It can make stable emulsions with water between 5-20 dH hardness. It provides a fine, low-odor, milky white emulsion, which resists demulsification and easily separates tramp oils. The advised mixing ratio is % 3.0 8.0 according the operation performed. Benefits : Very good rust prevention on parts after machining Wide metal compatibility - Al, Zn, Fe, Stainless Steel, Mg (except yellow metals) Good resistance to bacterial degradation Adapted for a wide range of machine feeds & speeds Increases production by extending tool life and reduces downtime due to tool changing Lower operational temperature Technical Data : TARMOND Test method Colour Visual Amber Clear Density at 15 °C gr/cm³ ASTM D 1298 0.87 pH @ % 3 concentration DIN 5136 9.0 9.2 Refractometer Reading @ % 3 concentration TRM-110 1.25 ± 0.1 Corrosion Performance @ % 3 concentrationDIN 51360/2 0/0 Pass Colour of Emulsion @ % 3 conc. Milky White

Product Description: MEA 710 is a general purpose, biodegradable, multi-functional, semi-synthetic emulsifiable cutting fluid with % 15 oil content. Recomended for ferrous, non-ferrous and cast iron machining operations. Thanks to the detergent additives it contains, its washing and sawdust dragging feature is very good. Due to the corrosion inhibitors in its formulation, it protects the processed material and production equipment against corrosion for a long time. It contains anti-bacterial and anti-fungal additives therefore it does not allow the formation of bacteria and fungi. It has biodegradable features; it is an environmentally friendly product that is in harmony with nature and does not harm the environment. The advised mixing ratio is % 3.0 8.0 according the operation performed. Benefits: Ability to make stable emulsions with water between 5-20 dH hardness Very high emulsion stability and low foaming tendency Excellent detergency, very good cooling and lubrication property Outstanding corrosion protection and high resistance against fungi and bacteria Increases production by extending tool life and reduces downtime due to tool changing Technical Data: TARMOND Test method Colour Visual Clear/Light Brown Density at 15 °C gr/cm³ ASTM D 1298 1 pH % 3 emulsion DIN 51369 9.4 - 9.6 Refractometer factor % 3 emulsion TRM-110 1.40 Corrosion % 3 emulsion DIN 51360/2 0/0 Pass Flash point °C ASTM D 92 170

Product Description: Tarmond MEA 756 is a general purpose, biodegradable, multi-functional, semi-synthetic emulsifiable cutting fluid containing EP additives with % 56 mineral oil content. Recomended for aluminium, yellow metals and very hard machining operations. Thanks to the detergent additives it contains, its washing and sawdust dragging feature is very good. Due to the corrosion inhibitors in its formulation, it protects the processed material and production equipment against corrosion for a long time. It contains anti-bacterial and anti-fungal additives therefore it does not allow the formation of bacteria and fungi. It has biodegradable features; it is an environmentally friendly product that is in harmony with nature and does not harm the environment. The advised mixing ratio is % 3.0 8.0 according the operation performed. Benefits: Ability to make stable emulsions with water between 5-20 dH hardness Very high emulsion stability and low foaming tendency Excellent detergency, very good cooling and lubrication property Outstanding corrosion protection and high resistance against fungi and bacteria Increases production by extending tool life and reduces downtime due to tool changing Technical Data: TARMOND Test method Colour Visual Clear/Light Brown Density at 15 °C gr/cm³ ASTM D 1298 0.97 pH % 3 emulsion DIN 51369 8.9 - 9.2 Refractometer factor % 3 emulsion TRM-110 1.05 Corrosion % 3 emulsion DIN 51360/2 0/0 Pass Flash point °C ASTM D 92 175

Product Description: Tarmond MEA 909 ERW is a general-purpose, biodegradable, fully-synthetic cutting fluid. It is used in processes that require high temperatures and moderate lubrication with its maximum cooling feature. Recommended for ferrous, non-ferrous, steel, cast iron machining operations and especially for tube welding industries. Thanks to the detergent additives it contains, its washing and sawdust dragging feature is very good. Due to the corrosion inhibitors in its formulation, it protects the processed material and production equipment against corrosion for a long time. It contains anti-bacterial and anti-fungal additives therefore it does not allow the formation of bacteria and fungi. It has biodegradable features; it is an environmentally friendly product that is in harmony with nature and does not harm the environment. The advised mixing ratio is % 3.0 5.0 according the operation performed. Benefits: Ability to make stable emulsions with water between 5-20 dH hardness Very high emulsion stability and low foaming tendency Excellent detergency, very good cooling and lubrication property Outstanding corrosion protection and high resistance against fungi and bacteria Increases production by extending tool life and reduces downtime due to tool changing Technical Data: TARMOND Test method Colour Visual Clear/Light Brown Density at 15 °C gr/cm³ ASTM D 1298 1.02 pH % 3 emulsion DIN 51369 9.4 9.6 Refractometer factor % 3 emulsion TRM-110 1.67 Corrosion % 3 emulsion DIN 51360/2 0/0 Pass Flash point °C ASTM D 92 170

Product Description: Tarmond MEA 950 is a general purpose, biodegradable, multi-functional, full-synthetic grinding transparent fluid. It is designed for use in most grinding operations including surface, cylindrical and centreless grinding. It is also used in honing, as well as general machining applications, such asboring, turning, milling and light duty drilling operations. Recomended for ferrous, non-ferrous, steel and cast iron grinding operations. Thanks to the detergent additives it contains, its washing and sawdust dragging feature is very good. Due to the corrosion inhibitors in its formulation, it protects the processed material and production equipment against corrosion for a long time. It has biodegradable features; it is an environmentally friendly product that is in harmony with nature and does not harm the environment. The advised mixing ratio is % 3.0 5.0 according the operation performed. Benefits: Ability to make stable emulsions with water between 5-20 dH hardness Very high emulsion stability and low foaming tendency Excellent detergency, very good cooling and lubrication property Outstanding corrosion protection and high resistance against fungi and bacteria Provides excellent cooling and chip removal, good tramp oil rejection and machine cleanliness Increases production by extending tool life and reduces downtime due to tool changing Technical Data: TARMOND Test method Colour Visual Clear/Light Brown Density at 15 °C gr/cm³ ASTM D 1298 1 pH % 3 emulsion DIN 51369 9.4 9.6 Refractometer factor % 3 emulsion TRM-110 2.2 Corrosion % 3 emulsion DIN 51360/2 0/0 Pass Flash point °C ASTM D 92 170

Product Description: THERMA SERIES are high-performance, low-viscosity oils of high resistance to oxidation and termal cracking. Created with the high-quality additive package to use in the closed heat transfer system with forced circulation, operating up to 300 °C bulk temperature. THERMA SERIES are optimally suited for use in the indirect heating of reactors, polymerization and distillation systems, processing machines and driers, as well as heat exchangers in processing systems and in systems for heat recovery. The film temperature should not exceed 320 °C . Benefits: Long-life products for maximum economy Excellent circulation efficiency and thermal stability High resistance to oxidation and protects against corrosion Extremely low coking It has high heat transfer properties and thermal permeability at all temperatures Minimises residue formation and provides clean systems Technical Data: TARMOND Test method 32 46 Colour Visual Clear/Yellowish Brown Clear/Yellowish Brown Density at 20°C gr/cm³ ASTM D 1298 0.870 0.874 Viscosity at 40°C, cSt ASTM D 445 32 46 Pour Point ,°C ASTM D 97 -33 -30 Working temperature of oil film 320 °C 320 °C Heat transfer coefficient, W/m K 0.12 0.12 Boiling point, °C DIN 51582 >350°C >350°C Flash point °C ASTM D 92 220 220

Product Description: Tarmond Heavygear EP-S PAO Series polyalphaolefin (PAO) technology has been selected for its exceptional oxidation resistance and thermal properties. This exclusive synthetic base fluid is the foundation for this novel, balanced gear oil formulation, which delivers benefits in micro pitting, viscosity index, air release, and low temperature flow characteristics versus other synthetic gear oils. It is produced by blending a premium quality PAO base oil, extreme pressure additives intended for use in all types of enclosed gear drives with circulation or splash lubrication systems. It is also suitable as a bearing oil for highly loaded plain bearings. Tarmond Heavygear EP-S PAO Series has excellent anti-wear and anti-friction properties. Particularly recommended for certain lubricated-for-life systems. Applications: Tarmond Heavygear EP-S PAO Series are recommended for enclosed industrial gear drives including steel-on-steel spur, helical, and bevel gears. They are recommended for applications that may be subject to micro pitting; especially heavily loaded gearboxes with surface-hardened tooth metallurgies. It may also be used in gear applications where extreme low and/or high temperatures are encountered and applications where corrosion may be severe. Benefits: Helps extend gear and bearing life in enclosed gear drives operating under extreme conditions of load, speed and temperature It reduces unplanned downtime and maintenance costs premature bearing failure and gearbox replacement especially critical for difficult to access gearboxes It reduces oil consumption and maintenance costs through extended oil life and drain intervals, offers better protection of equipment and longer drain intervals for optimized maintenance costs It provides smooth, trouble-free operations in all operating conditions and helps reduce additional on-site filtration and associated costs It has superior antifoam capacity and a very low pour point for an easier start up after a longer period of inactivity Meets Performance: API GL-4, DIN 51517 Part 3, US Steel 224, ISO 12925-1, Cincinnati Machine P34/63/76/77/78, GE D50E32 AC, SEW EURODRIVE

TARMOND PCF 512 is a neat cutting and grinding oil designed for difficult operations. Its high EP additive content based by premium fatty acid esters, these products are specially recommended for deep cutting, drilling etc. Very good lubrication property due to selected based oils and premium European additive technology. It leads to high anti-wear and anti-corrosion protection of cutting tools. It also performs excellent anti-mist properties during operation. Applications: TARMOND PCF 512 is designed for general machining of ferrous and non-ferrous metals. Benefits: Advanced additive technology gives high extreme pressure (EP) lubricity properties and lowers production costs through extended tool life Improved surface finish and increased cutting speeds leads to improvement of process efficiency Low odour and light colour results in high operator acceptability and allowing operators an excellent view of their work High level of machining performance Increased production resulting from improvement in tool life and a reduction in downtime for tool changes Wide range machining capability reduces product inventories Improved surface finish and dimensional accuracy results in fewer rejects The high extreme pressure content of the product allows cutting speeds and feeds to be maximised Low viscosity and excellent wetting characteristics reduce drag out and result in lower product usage Anti-mist additive reduces misting and oil usage in high-speed operations giving a clean and pleasant working environment

TARMOND PCF 535 is a pure cutting oil developed by blending high-tech additives and quality mineral base oils to be used in threading and broaching operations of ferrous metals, cast iron and low-medium-high alloyed steel. It is especially recommended for deep hole drilling and high-speed internal broaching as it has a very high EP additive content. It has good lubricating properties , good corrosion protection,low foaming and high vapor and oil mist protection. Applications: It is recommended for all heavy duty machining operations including gear cutting, tapping, pressing, broaching on difficult to machine materials. This product is not suitable for non-ferrous metals. Benefits: Advanced additive technology gives high extreme pressure (EP) lubricity properties and lowering production costs through extended tool life Improved surface finish and increased cutting speeds leads to improvement of process efficiency High level of machining performance Increased production resulting from improvement in tool life and a reduction in downtime for tool changes Wide range machining capability reduces product inventories Improved surface finish and dimensional accuracy results in fewer rejects The high extreme pressure content of the product allows cutting speeds and feeds to be maximised No staining of ferrous slideway parts or fixtures Anti-mist additive reduces misting and oil usage in high speed operations giving a clean and pleasant working environment

RPO 471 is a rust preventive oil used as a corrosion inhibitor. It repels water from metal surfaces by leaving an oily film on the metal surface. It cuts off the contact of metal with water and air preventing corrosion on the metal surface. It is aimed for preventing against corrosion of finished or semi-finished metal products or pieces to be used in the production line while being transported or stored. Application: Metal pieces to be protected should be immersed in RPO 471 Corrosion Inhibitor bath for 50±10 seconds or RPO- 471 Corrosion Inhibitor is sprayed on the metal surface. By forming a protective oil film on the metal, corrosion and rust formation are avoided on the metal surface. RPO-430 HP, is a solvent base rust preventive oil fluid having excellent water displacing properties for long term protection period. TARMOND RPO 430 HP leaves a waxy protective film on metal surface. RPO 428 ST, is a solvent base rust preventive fluid having excellent water displacing properties for long-term protection period where a thick oil film is not required. Benefits: Displaces water from metal surface and form a waxy protective film Easy to use Stable in wet conditions Provides excellent indoor and outdoor protection The protective film can be removed by alkaline cleaners